Mimaki CJV 30

		JV33-130	JV33-160	JV33-260
Head		On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width		1,361mm (53.5")	1,610mm (63.3")	2,632mm (103.6")
Printing resolution		540,720,1,440dpi
Printing mode (scan x feed)		540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
		720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
		1,440 x 1,440dpi
Ink	Kind	Exclusive Solvent ink: ES3 ink, SS21 ink
		Exclusive aqueous pigment ink
		Exclusive dye sublimation ink
	Capacity	4-color mode:440cc cartridge x 2/color, 880cc/color
		6-color mode:440cc cartridge x 1/color, 440cc/color
Media	Size	1,371mm (53.9")	1,620mm (63.9")	2,642mm (104.0")
	Roll weight	Less than 25kg (55.1lbs.)		Less than 100kg (220lbs.)
	Print surface	Face out
	Roll inside diameter	2 inch or 3 inch
Media cutting		Cutting on Y direction by cutter at the head
Media heater		Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device		Roll take-up device (standard), inside/outside selectable
Interface		USB2.0
Applicable standards		VCCI Class A,FCC Class A, UL 60950-1
		CE Marking (EMC directive, Low voltage directive), CB report
Power		AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz
Power consumption		Less than 1,440 VA		Less than 1,440 VA x 2 plugs
Operation environments		Usable temperature:20°C~35°C (64~95°F), Humidity:35~65%RH (No condensation)
Dimensions (W x D x H)		2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.1")	2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.1")	3,650 x 1,302 x 1,424mm ( 143.7" x 51.3" x 56.1")
Weight		145kg (320lbs.)	160kg (353lbs.)	450kg (992lbs.)

	Some of the samples in this catalogue are artificial renderings.
	Specifications, design and dimensions stated in this catalogue may be subject to change without notice (for technical improvements, etc).
	The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations.
	Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.