Mimaki SWJ320

Specifications

		SWJ-320 S2	SWJ-320 S4
Head		On-demand Piezo head (2 printheads with in-line conformation)	On-demand Piezo head (4 printheads with 2 staggered conformation)
Maximum width		Up to 3,200 mm (126")
Print resolution		600 / 900 / 1,200 × 360 / 540 / 720 / 1,080 dpi
Ink	Kind	CS100 solvent ink (C, M, Y, K)
	Ink supply system	2L bottle / each color
Media	Width	Up to 3,250 mm (128")
	Weight	Feeding : up to 100 kg (220lbs) / Take-up : up to 40 kg(88.2lbs)
Drying device		3 Way intelligent heater (Pre/Print/After), Drying fan unit
Media Feeding / Take-up device		Equipped
Interface		USB2.0
Power speci cation *	Main unit	Less than AC 200～240 V, 5 A
	Main heater	Less than AC 200～240 V, 10 A
	Drying fan unit	Less than AC 200～240 V, 14 A
Operational environment		Temperature: 20°C-35°C (64-95 °F); Humidity: 35-65 % RH (non condensing)
Dimensions (W × D × H)		4,560 × 1,200 × 1,405 mm (179.5" × 47.2" × 55.3")
Weight		Less than 600 kg (1,323 lbs)

• * SWJ-320 S2/S4 requires 3 power transmission lines.

Read more »

Mimaki JV5

JV5-130S	JV5-160S	JV5-320S
Print Head			On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width			1,365mm	1,620mm	3,250mm
Printing resolution			540、720、1,440 dpi
Printing mode (Scan x Feed)			540

Ink	Kind
			Exclusive solvent ink: ES3, HS, Eco-HS1		Exclusive solvent ink: ES3, HS, Eco-HS1
	Supply		Automatic change of double ink cartridges
	Capacity		66 color mode: 440 cc cartridge x 2/color, 880 cc/color
			4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
Media specification	Size	Max	Max. width 1,375 mm (54.13")	Max. width 1,630 mm(64.17")	Max. width: 3,300 mm (129.9")
		Min	Min. width 297 mm (11.6")
	Thickness		1.0 mm or below
	Roll weight		38 kg (83.7lbs.) or below		130 kg (286.6 lbs) or below
	Printing surface		Face out		Face out/ face in
	Inner diameter of paper bobbin/ outer diameter of roll		2 inch, 3 inch / f200 mm (7.87") or below		Inside: 3inch / Outside: Less than φ250mm (9.8")

Media cutting			Cutting in Y direction by cutter at the head
Media heater			3 way intelligent heater (PRE/PRINT/POST)
Media take-up device			Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less
Nozzle checking unit (NCU)			Laser system (Class 1 or below)
Print gap			1.5 mm to 7 mm, step-less & user setting (Automatic detection of media thickness)
Interface			USB2.0
Applicable standard			VCCI Class A, FCC Class A, UL 60950, CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification			AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below		AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below
Power consumption			3,600 VA or below		7,200 VA or below
Operating environment			Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh, Not condensing

Dimension	2,860 x 1,050 x 1,540 mm (112.6" x 41.4" x 60.7") 3,120 x 1,050 x 1,540 mm (122.9" x 41.4" x 60.7") 5,170 x 1,610 x 1,640 mm or below
Weight	324 kg (713.7lbs.) or below 333 kg (733.5lbs.) or below 1,200 kg (2,646 lbs) or below

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
• Also note that if using multiple printer units, colors may slightly vary from one unit to other units due to slight individual difference.
• Automatic take-up device is included as standard.

Read more »

Mimaki CGSR II

.		CG-75FXII	CG-130FXII	CG-160FXII
Acceptable sheet  width		90mm~1,040mm (3.54"~40.9")	90mm~1,580mm (3.54"~62.0")	90mm~1,880mm (3.54"~74")
Acceptable roll sheet		Outer less than φ200mm , Roll weight less than 18kg		Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1		760mm x 51m(29.9" x 167')	1,300mm x 51m(51.2" x 167')	1,600mmv

Maximum auto cutting width*2		870mm (34.2")	1,425mm (56.1")	1,720mm (67.7")
Maximum cutting speed		100cm/s (39.3"/s)
Maximum moving speed		140cm/s (55"/s)
Adjustable speed range*3		1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution		5µm(0.0002")
Command resolution		25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Pen pressure		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4		Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5		Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc
Interface		RS-232C,USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational	Temperature	5~35°C (41~95°F)
	Humidity	35~75%(Rh) Non-condensation
Power requirement		AC100V~240V
Power consumption		130VA or less
Dimensions (WxDxH)		1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9")	1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9")	2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9")
Weight (with stands)		50kg(110 lbs.)	60kg(132 lbs.)	69kg(152 lbs.)

All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice.
*1	Maximum sheet feerding length differs depending on software
*2	Sheet width to cut off from the roll
*3	Restricted sheet width
*4	Provided that the blade specific to fluorescent type vinyl(SPB-0007)the blade spacific to reflective sheet(SPB-0006)are used.
*5	Pouncing tool intended specifically for pouncing shall be used.
*6	The goods on the market are . No guaranty with accuracy, and image quality.

Read more »

Mimaki CJV 30

		JV33-130	JV33-160	JV33-260
Head		On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width		1,361mm (53.5")	1,610mm (63.3")	2,632mm (103.6")
Printing resolution		540,720,1,440dpi
Printing mode (scan x feed)		540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
		720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
		1,440 x 1,440dpi
Ink	Kind	Exclusive Solvent ink: ES3 ink, SS21 ink
		Exclusive aqueous pigment ink
		Exclusive dye sublimation ink
	Capacity	4-color mode:440cc cartridge x 2/color, 880cc/color
		6-color mode:440cc cartridge x 1/color, 440cc/color
Media	Size	1,371mm (53.9")	1,620mm (63.9")	2,642mm (104.0")
	Roll weight	Less than 25kg (55.1lbs.)		Less than 100kg (220lbs.)
	Print surface	Face out
	Roll inside diameter	2 inch or 3 inch
Media cutting		Cutting on Y direction by cutter at the head
Media heater		Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device		Roll take-up device (standard), inside/outside selectable
Interface		USB2.0
Applicable standards		VCCI Class A,FCC Class A, UL 60950-1
		CE Marking (EMC directive, Low voltage directive), CB report
Power		AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz
Power consumption		Less than 1,440 VA		Less than 1,440 VA x 2 plugs
Operation environments		Usable temperature:20°C~35°C (64~95°F), Humidity:35~65%RH (No condensation)
Dimensions (W x D x H)		2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.1")	2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.1")	3,650 x 1,302 x 1,424mm ( 143.7" x 51.3" x 56.1")
Weight		145kg (320lbs.)	160kg (353lbs.)	450kg (992lbs.)

	Some of the samples in this catalogue are artificial renderings.
	Specifications, design and dimensions stated in this catalogue may be subject to change without notice (for technical improvements, etc).
	The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations.
	Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Read more »