Mimaki JV5

JV5-130S	JV5-160S	JV5-320S
Print Head			On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width			1,365mm	1,620mm	3,250mm
Printing resolution			540、720、1,440 dpi
Printing mode (Scan x Feed)			540

Ink	Kind
			Exclusive solvent ink: ES3, HS, Eco-HS1		Exclusive solvent ink: ES3, HS, Eco-HS1
	Supply		Automatic change of double ink cartridges
	Capacity		66 color mode: 440 cc cartridge x 2/color, 880 cc/color
			4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
Media specification	Size	Max	Max. width 1,375 mm (54.13")	Max. width 1,630 mm(64.17")	Max. width: 3,300 mm (129.9")
		Min	Min. width 297 mm (11.6")
	Thickness		1.0 mm or below
	Roll weight		38 kg (83.7lbs.) or below		130 kg (286.6 lbs) or below
	Printing surface		Face out		Face out/ face in
	Inner diameter of paper bobbin/ outer diameter of roll		2 inch, 3 inch / f200 mm (7.87") or below		Inside: 3inch / Outside: Less than φ250mm (9.8")

Media cutting			Cutting in Y direction by cutter at the head
Media heater			3 way intelligent heater (PRE/PRINT/POST)
Media take-up device			Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less
Nozzle checking unit (NCU)			Laser system (Class 1 or below)
Print gap			1.5 mm to 7 mm, step-less & user setting (Automatic detection of media thickness)
Interface			USB2.0
Applicable standard			VCCI Class A, FCC Class A, UL 60950, CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification			AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below		AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below
Power consumption			3,600 VA or below		7,200 VA or below
Operating environment			Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh, Not condensing

Dimension	2,860 x 1,050 x 1,540 mm (112.6" x 41.4" x 60.7") 3,120 x 1,050 x 1,540 mm (122.9" x 41.4" x 60.7") 5,170 x 1,610 x 1,640 mm or below
Weight	324 kg (713.7lbs.) or below 333 kg (733.5lbs.) or below 1,200 kg (2,646 lbs) or below

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
• Also note that if using multiple printer units, colors may slightly vary from one unit to other units due to slight individual difference.
• Automatic take-up device is included as standard.