Mimaki SWJ320

Specifications

SWJ-320 S2SWJ-320 S4
Head On-demand Piezo head
(2 printheads with in-line conformation)
On-demand Piezo head
(4 printheads with 2 staggered conformation)
Maximum width Up to 3,200 mm (126")
Print resolution 600 / 900 / 1,200 × 360 / 540 / 720 / 1,080 dpi
InkKind CS100 solvent ink (C, M, Y, K)
Ink supply system 2L bottle / each color
MediaWidth Up to 3,250 mm (128")
Weight Feeding : up to 100 kg (220lbs) / Take-up : up to 40 kg(88.2lbs)
Drying device 3 Way intelligent heater (Pre/Print/After), Drying fan unit
Media Feeding / Take-up device Equipped
Interface USB2.0
Power speci cation *Main unit Less than AC 200~240 V, 5 A
Main heater Less than AC 200~240 V, 10 A
Drying fan unit Less than AC 200~240 V, 14 A
Operational environment Temperature: 20°C-35°C (64-95 °F);
Humidity: 35-65 % RH (non condensing)
Dimensions (W × D × H) 4,560 × 1,200 × 1,405 mm (179.5" × 47.2" × 55.3")
Weight Less than 600 kg (1,323 lbs)
  • * SWJ-320 S2/S4 requires 3 power transmission lines.

Mimaki JV5

JV5-130SJV5-160SJV5-320S
Print Head On-demand Piezo head (Array of 4 staggered print heads)
Maximum printing width 1,365mm 1,620mm 3,250mm
Printing resolution 540、720、1,440 dpi
Printing mode
(Scan x Feed)
540
InkKind
Exclusive solvent ink: ES3, HS, Eco-HS1 Exclusive solvent ink: ES3, HS, Eco-HS1
Supply Automatic change of double ink cartridges
Capacity 66 color mode: 440 cc cartridge x 2/color, 880 cc/color
4 color mode: 440 cc cartridge x 4/color, 1760 cc/color
Media
specification
SizeMax Max. width 1,375 mm (54.13") Max. width 1,630 mm(64.17") Max. width: 3,300 mm (129.9")
Min Min. width 297 mm (11.6")
Thickness 1.0 mm or below
Roll weight 38 kg (83.7lbs.) or below 130 kg (286.6 lbs) or below
Printing surface Face out Face out/ face in
Inner diameter of
paper bobbin/
outer diameter
of roll
2 inch, 3 inch / f200 mm (7.87") or below Inside: 3inch / Outside: Less than φ250mm (9.8")
Media cutting Cutting in Y direction by cutter at the head
Media heater 3 way intelligent heater (PRE/PRINT/POST)
Media take-up device Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less
Nozzle checking unit (NCU) Laser system (Class 1 or below)
Print gap 1.5 mm to 7 mm, step-less & user setting
(Automatic detection of media thickness)
Interface USB2.0
Applicable standard VCCI Class A, FCC Class A, UL 60950,
CE Marking (EMC Directive, Low Voltage Directive) , CB Report, RoHS
Power source specification AC 200V to 240V ±10%, 50/60 Hz ± 1Hz 15 A or below AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below
Power consumption 3,600 VA or below 7,200 VA or below
Operating environment Usable temperature: 20°C to 35°C, Humidity: 35 % to 65%Rh,
Not condensing

Dimension

2,860 x 1,050 x 1,540 mm
(112.6" x 41.4" x 60.7")
3,120 x 1,050 x 1,540 mm
(122.9" x 41.4" x 60.7")
5,170 x 1,610 x 1,640 mm or below

Weight

324 kg (713.7lbs.) or below 333 kg (733.5lbs.) or below 1,200 kg (2,646 lbs) or below
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
  • Also note that if using multiple printer units, colors may slightly vary from one unit to other units due to slight individual difference.
  • Automatic take-up device is included as standard.

Mimaki CGSR II


. CG-75FXII CG-130FXII CG-160FXII
Acceptable sheet  width 90mm~1,040mm (3.54"~40.9") 90mm~1,580mm (3.54"~62.0") 90mm~1,880mm (3.54"~74")
Acceptable roll sheet Outer less than φ200mm , Roll weight less than 18kg Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1 760mm x 51m(29.9" x 167') 1,300mm x 51m(51.2" x 167') 1,600mmv
Maximum auto cutting width*2 870mm (34.2") 1,425mm (56.1") 1,720mm (67.7")
Maximum cutting speed 100cm/s (39.3"/s)
Maximum moving speed 140cm/s (55"/s)
Adjustable speed range*3 1-10cm/s : 1cm step adjustment
(0.39"-3.94"/s : 0.39" step adjustment)
10-50cm/s : 5cm step adjustment
(3.94"-19.68"/s : 2" step adjustment)
50-100cm/s : 10cm step adjustment
(19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution 5µm(0.0002")
Command resolution 25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability ±0.2mm (Excluding shrinkage /
expansion caused by the film temperature)
Pen pressure 400g
Range of down pressure Cutter 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pouncing 10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
Pen 10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4 Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl
Reflective sheet
Acceptable sheet for pouncing*5 Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6 Cutter, Water based ball-point pen,
Oil based ball-point pen, Pouncing tool
Type of command MGL-IIc
Interface RS-232C,USB
Receiver buffer size 30MB Standard (20MB when in sorting)
Operational Temperature 5~35°C (41~95°F)
Humidity 35~75%(Rh) Non-condensation
Power requirement AC100V~240V
Power consumption 130VA or less
Dimensions (WxDxH) 1,285mm(50.5")x
700mm(27.5")x
1,217mm(47.9")
1,825mm(71.8")x
700mm(27.5")x
1,217mm(47.9")
2,125mm(83.6")x
700mm(27.5")x
1,217mm(47.9")
Weight (with stands) 50kg(110 lbs.) 60kg(132 lbs.) 69kg(152 lbs.)


All trademarks or registered trademarks are the property of the respective owners.
Specifications are subject to change without notice.
*1 Maximum sheet feerding length differs depending on software
*2 Sheet width to cut off from the roll
*3 Restricted sheet width
*4 Provided that the blade specific to fluorescent type vinyl(SPB-0007)the blade spacific to reflective sheet(SPB-0006)are used.
*5 Pouncing tool intended specifically for pouncing shall be used.
*6 The goods on the market are . No guaranty with accuracy, and image quality.

Mimaki CJV 30

JV33-130
JV33-160
JV33-260
Head
On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width 1,361mm (53.5") 1,610mm (63.3") 2,632mm (103.6")
Printing resolution 540,720,1,440dpi
Printing mode
(scan x feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi,
720 x 1,440dpi
1,440 x 1,440dpi
Ink Kind
Exclusive Solvent ink: ES3 ink, SS21 ink
Exclusive aqueous pigment ink
Exclusive dye sublimation ink
Capacity 4-color mode:440cc cartridge x 2/color, 880cc/color
6-color mode:440cc cartridge x 1/color, 440cc/color
Media Size 1,371mm (53.9") 1,620mm (63.9") 2,642mm (104.0")
Roll weight Less than 25kg (55.1lbs.) Less than 100kg (220lbs.)
Print surface Face out
Roll inside diameter 2 inch or 3 inch
Media cutting Cutting on Y direction by cutter at the head
Media heater Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device Roll take-up device (standard), inside/outside selectable
Interface USB2.0
Applicable standards VCCI Class A,FCC Class A, UL 60950-1
CE Marking (EMC directive, Low voltage directive),
CB report
Power AC100~120V±10%, AC220~240V±10%,
50/60Hz±1Hz
Power consumption Less than 1,440 VA Less than 1,440 VA x 2 plugs
Operation environments Usable temperature:20°C~35°C (64~95°F),
Humidity:35~65%RH (No condensation)
Dimensions (W x D x H) 2,289 x 739 x 1,424mm
(90.1" x 29.1" x 56.1")
2,538 x 739 x 1,424mm
(99.9" x 29.1" x 56.1")
3,650 x 1,302 x 1,424mm
( 143.7" x 51.3" x 56.1")
Weight 145kg (320lbs.) 160kg (353lbs.) 450kg (992lbs.)

Some of the samples in this catalogue are artificial renderings.
Specifications, design and dimensions stated in this catalogue may be subject to change without notice (for technical improvements, etc).
The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations.
Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Mimaki UJF 3042


UJF-3042
Head On-demand Piezo head
Print resolution 720 × 600 dpi, 1,440 × 1200 dpi
Ink Hard UV curable ink : LH-100
Ink capacity 220 ml / cartridge
Maximum print width Width : 300 mm (11.8 "), Length : 420 mm (16.5 ")
Media Width Width : 364 mm (14.3 "), Length : 463 mm (18.2 ")
Thickness Max. 50 mm (1.97 ")
Weight Less than 5 kg (11 lbs)
Set device Air suction by vacuum
UV device Equipped with UV Light Emitting Diodes
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL, RoHS Directive, CE Marking
Power specifications AC 100 - 240 V (Automated voltage conversion)
Power consumption Less than 350 VA
Operational environment Temperature 20 - 35 °C (68 - 95 °F)
Humidity 35 - 65 % Rh
Dust Equivalent to normal office level
Weight Approx. 113kg (249.1 lbs.)
Dimensions (W x D x H) 1,200 mm x 1,090 mm x 770 mm (47.2 " x 42.9 " x 30.3 ")

UV Printer Dilli

Model NEO TITAN
UVT-1606(S) / UVT-2506(S)
Print Head Drop-on-demand Piezo
Quantitiy Head 6 Konica KM512 14PL, 2 Konica KM512 42PL
Maximum Resolution 720 x 1440 dpi
Print Mode Uni & Bi-direction
Printer Speed Production Mode : 13 ~ 17 m2 / hr
Quality Mode : 6 ~ 10 m2 / hr
CPU 32 BIT RISC
Memory Main Memory 256 MB
Command SP-RTL and HP-RTL Emulation
Interface TCP / IP
Ink Type UV Ink Base Pigmnet
Color 6 Color ( C,M,Y,K,LC,LM )
Exsternal Dimension 3,490mm x 1,440mm x 1,580mm ( W x D x H )
Weight 900 Kg
Media Flat and Roll ( foamboard, acrylic, glass, wood, flex, sheet, steel )

Max Output Range 1,600 x unlimited
Input Voltage Singel Phase 220V +/- 10% ( 50/60Hz, AC )
Vacum Control System Supply Pressure 5 kgf / cm2
Vacuum Pressure : -0,03 ~ 0,04 Kgf / cm2
Auto Lifting System Head : 50mm
Carriage & Media Feeding AC Servo Driver
Warantty 1 Year exclude printhead
Other Characteristic Auto Ink Refill System
Auto Lamp Shuttering System
Vacuum, Belt Media Feed syste
Auto Head Height Control

Canon iPF 6300

Main Unit Specs
Printer Type 12-Color 24-inch Printer
Number of Nozzles Total: 30,720

All colors: 2,560 nozzles each
Nozzle Pitch 1,200 dpi

Non-firing nozzle detection and compensation
Print Resolution (Up to) 2,400 x 1,200 dpi (Max)
OS Compatibility Windows XP/Server 2003/Server 2008/Vista/7 (32/64bit), Macintosh OSX 10.3.9-10.6 (32 bit), OS X 10.5-10.6 (64 bit)
Standard Interfaces USB 2.0 High-Speed

10/100/1000 Base-T/TX
Ink Compatibility 4 picoliter
Ink Capacity 130ml per color2
Ink Droplet Size LUCIA EX ink (Pigment-based)
Color Set Cyan, Photo Cyan, Magenta, Photo Magenta, Yellow, Black, Matte Black, Red, Green. Blue, Gray, Photo Gray
Buffer Ram 384 MB
Media Width Cut Sheet and Roll: 8"-24"
Media Thickness Top Loading Manual Feed: 0.07 - 0.8mm (3.2 - 31.4mil)

Front Loading Manual Feed: 0.5 - 1.5mm (19.6 - 59.0mil)

Roll: 0.07 - 0.8mm (3.2 - 31.4mil)
Maximum Roll Print Length 59 Feet (18 meters)3
Maximum Media Roll Diameter 5.9" (150mm)
Borderless Printing Width 10" (254 mm), B4 (257 mm), A3+ (329 mm), 14" (356 mm), 16" (407 mm), A2 (420 mm), A2+/17" (432 mm), B2 (515 mm), A1 (594 mm), 24" (610 mm)
Paper Feed Method Roll Feed: One Roll, front output

Top Loading Manual Feed: One sheet, front output

Front Loading Manual Feed: One sheet, front output
Languages GARO (Canon Proprietary)
Noise Level Approx Operation: 47dB (A) or less

Acoustic Power: 6.4 Bels
Physical Dimensions (with stand): 39.1" (H) x 46.4" (W) x 34.3" (D)
Weight Approximately 146lbs. with stand
Power Source AC-100-120V (50-60Hz)
Power Consumption Maximum: 100W or less

Standby: 6W or less

Power Off: 1W or less (Compliant with Executive Order)
Operating Environment Temperature: 59°-86° F (15°-30° C)

Relative Humidity - 10-80% (No Condensation)
User-replaceable items Print Head (PF-05)

Maintenance Cartridge (MC-16)

Ink Tanks (PFI-105)
Software Included Canon Printer Driver, Print Plug-in for Adobe Photoshop. Print Plug-in for Digital Photo Professional, PosterArtist Lite (PC Only), Digital Photo Front-Access, Printer Driver Extra Kit (Free Layout, Color imageRUNNER Enlargement Copy, Advanced Preview), Print Plug-in for Microsoft® Word/Excel/PowerPoint (PC only), Accounting Manager

*1 For the information of purchasable media, contact your local sales representative.
*2 Maximum printable length varies according to the OS and application.

Canon iPF 8300

CANON THE IMAGEPOGRAF iPF8300, capable of producing B0+ (44 inch wide) output, and the iPF6350 and iPF6300, both capable of producing A1+ (24 inch wide) output. Ideal for Photo Studio, Graphic Applications and Color Proofing, the new lineup achieves a level of performance essential for professional users

Main Unit Specs


Printer Type
12-Color 44-inch Printer
Number of Nozzles
Total: 30,720

All colors: 2,560 nozzles each
Nozzle Pitch
1,200 dpi

Non-firing nozzle detection and compensation
Print Resolution (Up to)
2,400 x 1,200 dpi (Max)
OS Compatibility
Windows XP/Server 2003/Server 2008/Vista/7 (32/64bit), Macintosh OSX 10.3.9-10.6 (32 bit), OS X 10.5-10.6 (64 bit)
Standard Interfaces
USB 2.0 High-Speed

10/100/1000 Base-T/TX
Ink Compatibility
4 picoliter
Ink Capacity
330ml per color (Optional 700ml)
Ink Droplet Size
LUCIA EX ink (Pigment-based)
Color Set
Cyan, Photo Cyan, Magenta, Photo Magenta, Yellow, Black, Matte Black, Red, Green. Blue, Gray, Photo Gray
Buffer Ram
384 MB
Hard Drive
80GB
Media Width
Cut Sheet: 8" - 44"

Roll: 10" - 44"
Media Thickness
Top Loading Manual Feed: 0.07 - 0.8mm (3.2 - 31.4mil)

Roll: 0.07 - 0.8mm (3.2 - 31.4mil)
Maximum Roll Print Length
59 Feet (18 meters)2
Maximum Media Roll Diameter
5.9" (150mm)
Borderless Printing Width
515mm (JIS B2), 1, 030mm (JIS B0), 594mm (ISO A1), 841mm (ISO A0), 10", 14", 17", 24", 36", 42", 44"
Paper Feed Method
Roll Feed: One Roll, front output

Front Loading Manual Feed: One sheet, front output
Languages
GARO (Canon Proprietary)
Noise Level Approx
Operation: 50 dB (A) or less

Acoustic Power: 6.8 Bels
Physical Dimensions
(with stand): 45" (H) x 74.5" (W) x 38.4" (D)
Weight
Approximately 316lbs. with stand
Power Source
AC-100-240V (50-60Hz)
Power Consumption
Maximum: 190W or less

Standby: 5W or less

Power Off: 1W or less (Compliant with Executive Order)
Operating Environment
Temperature: 59°-86° F (15°-30° C)

Relative Humidity - 10-80% (No Condensation)
User-replaceable items
Print Head (PF-05)

Maintenance Cartridge (MC-08)

Durable Rotary Media Cutter (CT-06)

Ink Tanks (PFI-304, PFI-704)
Software Included
Canon Printer Driver, Print Plug-in for Adobe Photoshop. Print Plug-in for Digital Photo Professional, Digital Photo Front-Access, Printer Driver Extra Kit (Free Layout, Color imageRUNNER Enlargement Copy, Advanced Preview), Print Plug-in for Microsoft® Word/Excel/PowerPoint (PC only), Accounting Manager

Winjet LIMO 320


WINJET SPECTRA POLARIS LIMO, 4 pieces of well known Spectra polaris 512 durable print heads. Deliver high saturation, high speed over 90m² /hr for outdoor billboard. Precise ink positioning improve printing effect. Rigid and heavy duty body structure support high spee.Max Printing Widht 3200 mm, printhead technology. 
Winjet Polaris 15 PL

MODEL

LIMO

Max. Media Width
3300(mm)
Max. Printing Width
3200(mm)
Print head & QTY
Spectra Polaris 15pl/35pl/85pl 2/4 heads
Mode & Speed
Resolution
Output (m/h)
15pl
35pl
85pl
2pass
84
72
96
3pass
61
50
64
4pass
45
38
48
6pass
29
26
32
8pass
22
20
24
Media Type
flex,vinyl,window, film, polyester,
Media Transmission
Auto feed in,auto take up(option)
Ink Colors
4colors , CMYK
Ink type
Solvent, eco solvent
Main Feature
Positive valve transfer cleaning
Print Head Height
2.5mm-4.5mm adjustable
Operating System
Win2000、NT、XP、VISTA、Win7
Interface
USB2.0
Software
Aprint RIP, support third party RIP
Power
AC110/220V,50HZ/60HZ


Winjet Fox 320

WINJET SPECTRA POLARIS FOX, 4 pieces of well known Spectra polaris 512 durable print heads. Deliver high saturation, high speed over 90m² /hr for outdoor billboard. Precise ink positioning improve printing effect. Rigid and heavy duty body structure support high spee.Max Printing Widht 3200 mm, printhead technology. 
Model
FOX-330(250)
Max. Media Width
3300mm
Max. Printing Width
3200mm
Print head & QTY
Spectra Polaris 15pl/35pl/85pl  2/4 heads
Mode & Speed
Resolution
Output (m/h)

15pl
35pl
85pl
2 pass
84
72
96
3 pass
61
50
64
4 pass
45
38
48
6pass
29
26
32
8pass
22
20
24
Media Type
flex,vinyl,window, film, polyester,
Media Transmission
Auto feed in,auto take up(option)
Ink Colors
4colors , CMYK
Ink Type
Solvent, eco solvent
Heating System
Pre& Post media heating, print head heating, fan drier
Print Head Height
2.5mm -4.5mm adjustable
Operating System
Win2000、NT、XP、VISTA、Win7
Interface
USB2.0
Software
Aprint RIP , support third party RIP
Power
AC110 /220V,50HZ/60HZ

Printex 160


Printex Welcome to the era of textile printing, get printing on fabric with the ease of this machine, reliable and resilient toproduce quality textile. With the latest high-tech machine, get some of the highlights. Enter new era for TEXTILE PRINTING, Expand & Enjoy MILLION OF COLORS under your creativity, Customized your market, Easy operation & maintainance, No Film,

born-quality products with many kinds of variations, so you can enter the market easily, without the complicated process of printed manuals with a long production line























Terimakasih telah berkunjung ke blog ini, ini adalah blog promosi untuk produk kami mesin digital printing,. dari printmate indonesia,. www.printmate.co.id, konten dan layoutnya sedang dalam perbaikan ...Terimakasih